Skip to content
dartpilot
Esc
↑↓navigate↵open⌘Jpreview
On this page

Calibration

Let dartpilot find your board in each camera.

Calibration is how dartpilot learns your board. It works out where the segments are in each camera’s picture, so a dart is scored where it actually landed. It’s the step you should never skip, and it’s automatic: point the cameras at the board and dartpilot finds it.

Before you start

  • Cameras are mounted and positioned (Placing your cameras).
  • The whole board is visible in every camera.
  • The board is fixed in place, and the lighting won’t change while you calibrate.

Running calibration

  1. Open calibration in the desktop app. The first time you run the app, onboarding takes you through it.
  2. Choose the cameras you want to use.
  3. Wait for each camera to report Calibrated. If one fails, move it so the whole board is in frame, check the lighting, and run it again.
  4. Throw a few darts at segments you know and check they score correctly.

If a camera’s picture is sideways or upside down, rotate its view before you calibrate.

Keeping it accurate

Calibration holds as long as nothing moves. Re-run it if the board is moved, a camera is knocked, or the lighting changes significantly.

Was this page helpful?